Hi,

I`m looking for the washers that are below the fork seal and below the dust seal (55mm od, 43mm id, 1,5mm thick). These are normally quite rusted.
I already contacted Marzocchi, but I`m wondering if there`re other shops selling parts or equivalent washers in alum. alloy or stainless steel. I could find washers with matching id but not with matching od. Matching od is more important (id could be a little bigger also).
Apperently they cannot be ordered via Ducati anymore.

G.

no, there are 2 per leg. You also had 2, it`s just that the one positioned under the seal is in the oil and therefore usually ok, while the one under the dust cap gets rusty.



I asked a friend now if he can have the washers lasercut in his company. I hope he can ...

G.