Hello all,

I need to replace my rear valve stem as it is broken. Do the Oscam wheels use a special size, or can I use any standard size replacement?

Thanks

many of the standard sizes available might fit

They come in 8.3mm and 11.3mm sizes to fit the hole in the rim. For a Ducati you need the smaller 8.3mm size. Like these -

Great news, thank you for helping me out. Those were actually the ones I was wanting to get.

The right angle ones look real good but I found they fouled the front calipers if you have them at 90 deg

I was told by the tyre shop that the right angled ones didn't fit as they weren't long enough for our rims

So, for a few dollars, I bought a brass right-angled adaptor valve-extension to screw on when checking tyre pressures. He had some on the counter. I keep it under the seat. Works mint.

I found these to be a perfect match to the original by a company called K&L and sold through The Motorcycle Superstore. They seem to be good quality, too.


http://www.motorcycle-superstore.com/36 ... valve-stem