| ducatipaso.org http://ducatipaso.org/forum/ |
|
| where to find M1R parts ? http://ducatipaso.org/forum/viewtopic.php?f=1&t=2415 |
Page 1 of 1 |
| Author: | paso750 [ Mon Apr 21, 2008 7:26 pm ] |
| Post subject: | where to find M1R parts ? |
Hi, I`m looking for the washers that are below the fork seal and below the dust seal (55mm od, 43mm id, 1,5mm thick). These are normally quite rusted. I already contacted Marzocchi, but I`m wondering if there`re other shops selling parts or equivalent washers in alum. alloy or stainless steel. I could find washers with matching id but not with matching od. Matching od is more important (id could be a little bigger also). Apperently they cannot be ordered via Ducati anymore. G. |
|
| Author: | Desmo_Demon [ Mon Apr 21, 2008 9:45 pm ] |
| Post subject: | Re: where to find M1R parts ? |
| Author: | paso750 [ Tue Apr 22, 2008 8:16 am ] |
| Post subject: | Re: where to find M1R parts ? |
no, there are 2 per leg. You also had 2, it`s just that the one positioned under the seal is in the oil and therefore usually ok, while the one under the dust cap gets rusty. I asked a friend now if he can have the washers lasercut in his company. I hope he can ... G. |
|
| Author: | Desmo_Demon [ Tue Apr 22, 2008 9:31 am ] |
| Post subject: | Re: where to find M1R parts ? |
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|