Good tip, thx f sharing!
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Starter motor brush plate and brushes http://ducatipaso.org/forum/viewtopic.php?f=1&t=2573 |
Page 1 of 2 |
| Author: | redmidget [ Sun Jun 29, 2008 4:21 pm ] |
| Post subject: | Starter motor brush plate and brushes |
I replaced the starter motor brush plate and pillar with brush for my 750 Paso with identical and available Kawasaki parts. Kawasaki ZX750 (1996-2003) and ZX900 (1994-1997) use the same parts. Two parts numbers are required: Brush plate with one brush attached: 14079-2055 Pillar with one brush attached: 21169-1058 |
|
| Author: | Tamburinifan [ Mon Jun 30, 2008 12:05 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
Good tip, thx f sharing!
|
|
| Author: | ducapaso [ Tue Jul 01, 2008 1:54 pm ] |
| Post subject: | Re: Starter motor brush plate and brushes |
Good tip, anyhow brushes are still available in duc dealers 
|
|
| Author: | Mc tool [ Tue Jul 01, 2008 8:23 pm ] |
| Post subject: | Re: Starter motor brush plate and brushes |
I needed new brushes for my 900ss (1997) and baulked at paying nz$80 for the parts so I went to the local auto sparky and got a pack of 4 brushes for 12 bucks . Each brush needed a swipe with a file to fit and a small soldering job to fit to the brush plate. Most auto sparkies can also supply a suitable regulator / rectifyer at a good price . I hate to state the bleedin obvious but it is important to make sure that the starter motor is waterproofed upon re assembly |
|
| Author: | DonaldoDuck [ Wed Jul 02, 2008 5:09 pm ] |
| Post subject: | Re: Starter motor brush plate and brushes |
This is great info! Thanks! |
|
| Author: | Debonair [ Sat Jul 05, 2008 11:28 pm ] |
| Post subject: | Re: Starter motor brush plate and brushes |
Great tip, let's keep them coming! We all know that the parts for our Paso's are becoming more and more rare. |
|
| Author: | Rodney [ Sun Jul 06, 2008 2:07 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
i replaced my starter motor from a 96 ss the starter motor i believe is the same even up to the ST2 and ST4 models. |
|
| Author: | persempre907 [ Tue Jul 08, 2008 10:30 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
i'd put that in the FAQ. Ciao |
|
| Author: | Rodney [ Wed Jul 09, 2008 7:17 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
Hi all. just checked my ST2 2002 and starter motor has same part no.128000-6050 |
|
| Author: | ducatipete [ Fri Aug 08, 2008 9:34 pm ] |
| Post subject: | Re: Starter motor brush plate and brushes |
Is the round graphite bush that supports the armature available too??? |
|
| Author: | Rodney [ Sat Aug 09, 2008 7:07 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
you would have to check with your local dealer but if the brush plate is available you would assume the bush would be too. |
|
| Author: | ducatipete [ Sat Aug 09, 2008 7:13 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
already checked, brushes are not available here in the UK..I have replaced the starter with a 748 one, same part number, just would like to repair the old one as a spare.... |
|
| Author: | Rodney [ Sat Aug 09, 2008 8:00 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
look up "GOWANLOCH" they are in Sydney Australia. They have a lot of little odds and sods , they may have one. |
|
| Author: | Mustang505 [ Thu Jul 29, 2010 4:25 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
just to add to this list of info for starter brushes I have just bought Honda parts that fit - turns out the starter motor used on the Paso & Sport is a Japanese one so parts fairly common. Honda part numbers for the brushes are: 31201-HA0-004 31231-ZA1-003 I paid $NZ63.00 for both. |
|
| Author: | Mc tool [ Thu Jul 29, 2010 8:48 am ] |
| Post subject: | Re: Starter motor brush plate and brushes |
12 bucks |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|