ducatipaso.org http://ducatipaso.org/forum/ |
|
Any info available from this "project"? http://ducatipaso.org/forum/viewtopic.php?f=1&t=3920 |
Page 1 of 1 |
Author: | Finnpaso [ Tue Feb 16, 2010 3:45 pm ] |
Post subject: | Any info available from this "project"? |
This seems to be from Spain... http://www.youtube.com/watch?v=PVdzVoKqioU I wonder as there is that "750i"(injection?), but seems that still at least air filters, but seems, that video is little too "mesh" to see any details, so thats why my question to here... I remember little that long time ago there was some set/aftremarket kit to change 750 Paso to injected, but it was long time ago and i dont have anymore any link to that spare part set. It was aftermarket and designed to replace just Weber... Btw, seems, that this bike have some electrical changes done, but again: not enough accurate video to see details... Anybody know more about this bike? ![]() |
Author: | paso750 [ Tue Feb 16, 2010 3:59 pm ] |
Post subject: | Re: Any info available from this "project"? |
ask JoseCarlos ![]() viewtopic.php?f=1&t=3377&p=26069&hilit=face#p26069 Aftermarket injection kits are sold ie by Silent Hektik, but those are more for the 900cc Ducs. |
Author: | Finnpaso [ Tue Feb 16, 2010 4:24 pm ] |
Post subject: | Re: Any info available from this "project"? |
Are those CBR 600 rims 16" or 17" ??? i quess 17" an looks very similar to Marchesini's .... It would be nice to know, what mods he needeed to make that conversion(at least some front brake caliper adopters).... Seems that he doesnt visit so often here... ![]() |
Author: | paso750 [ Tue Feb 16, 2010 5:05 pm ] |
Post subject: | Re: Any info available from this "project"? |
the wheels he used are 3.5 x17 & 4.5 x17 (120/60/17 & 160/60/17). The front brake of the CBR600F has 276mm. As it looks the caliper adapters are the normal ones for the 4 piston caliper conversion so if you`re lucky there`s nothing else to be done for the front brakes. Can`t see what was done for the rear brake as the disc of the CBR600 is 220mm only. |
Author: | jcslocum [ Wed Feb 17, 2010 12:32 am ] |
Post subject: | Re: Any info available from this "project"? |
That's not a Paso engine in the frame. It must be an adapted lateri ie engine from a Monster or SS. The wheels do look good. |
Author: | paso750 [ Wed Feb 17, 2010 9:01 am ] |
Post subject: | Re: Any info available from this "project"? |
it`s the engine from a crashed 750SSie, it says somewhere |
Author: | Tamburinifan [ Wed Feb 17, 2010 12:38 pm ] |
Post subject: | Re: Any info available from this "project"? |
Author: | Finnpaso [ Wed Feb 17, 2010 1:56 pm ] |
Post subject: | Re: Any info available from this "project"? |
I noticed same earlier and tought that electrics had to be modified alot. Yes, its really 1.5 ECU.... |
Author: | jcslocum [ Wed Feb 17, 2010 10:51 pm ] |
Post subject: | Re: Any info available from this "project"? |
Si that settles the question?? |
Author: | persempre907 [ Thu Feb 18, 2010 4:46 pm ] |
Post subject: | Re: Any info available from this "project"? |
I already saw that video somewhere. Very nice those rims. The only thing I don't like is the colour of the frame. Ciao |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |