Hi all,

Earlier today I finished the wiring upgrade on the Paso and took some shots of the finished article.
The relais and the fuses on the electronics plate:


The relais at the coils:


Checked and double-checked after everything was connected and held my breath pressing the starter button: Success!!!
It works a treat and I'm pretty stoked that it all worked first go. I used crimped connectors and shrink tubing on the joints. During the upgrade I also took apart all the connectors and cleaned all the contacts.

As always, the information on this forum is absolutely fantastic in keeping a Paso running!

Cheers,

Mike

Well seeing that sure helps me with a decision at hand, Im gunna have spaghetti on toast for brekkie

This would be the kind of spaghetti where you have to cut the strands to size and have to replace some sections before putting it on the toast?

mussel patties.........carefully .Last night I got on the piss for the 1st time sinse the prang (15 months ), what a laugh . Im still pretty wobbly on my elbow crutches at the best of times ,but pissed is a whole different thing, put my elbow thru the dunny wall