That just looks so wrong ...
G.
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Hello all. New guy to the forums http://ducatipaso.org/forum/viewtopic.php?f=1&t=5625 |
Page 1 of 1 |
| Author: | aaxiss [ Sat Oct 27, 2012 6:12 am ] |
| Post subject: | Hello all. New guy to the forums |
I am the proud original owner of a 750 Paso. the bike has 431 miles on it. I made the horrid mistake of letting a friend ride it and he grabbed to much front brake and stuffed it offer on the right side@ about 10 mph. I am in the process of repairing the minor damage and repainting the entire bike. was originally the metallic blue but I am switching to the red paint scheme. the bike has been sitting for about 12 years but has been started and run regularly about every 3 months with fresh gas every time. during the 20+years since I purchased the bike I was in a hit and run accident on my gsxr and I am now paralyzed from the chest down. I am a metal fabricator by trade and I am considering converting it to a can-am spyder configuration. the conversion is not the issue, I need a set of the Ducati decals... the big tank Ducati, the desmo and the 750 Paso for the rear. other than those I'm not worried about the rest. I'm currently in the process off constructing the front sub frame and upper and lower front arms. pingle electric shifter and removing the stock pegs and installing foot plates in a more forward position. I may even just restore the bike and use the gsxr as my reverse trike platform. but my main concern now is restoring the bike to original then I'll process from there may be back with more questions and pleas for help as I progress. I will also be fabricating a single side swing arm to accommodate an automotive tire in the rear in the 8-10 wide range. might require a jackshaft for the proper offset but that is a way off for now. Any way just saying hello and will be back with more questions and pleas for help Don |
|
| Author: | 900streetfighter [ Sat Oct 27, 2012 7:34 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
Hello Don, Welcome to the site. So sorry to hear of your accident, you seem to be coping well. I wonder if I would be so brave in a similar situation. I hope you have lots of support from friends and family. Where are you? Your project sounds very complicated but there's lots of clever people on here to advise you. I have seen a Paso with a 916 swingarm and can probably dig up a pic of it, but it sounds like that wouldn't be suitable for what you propose to build. The decals you require are available from ebay, I have no idea of the quality. You might be able to get originals via dealers, the 'cagiva era' graphics were used on monsters and SS up to 96 and some of the sizes are identical to Paso. The originals have to be applied after paint before laquer as they are matt finish. Cheers, Keith. http://www.ebay.co.uk/itm/750-Paso-deca ... 51a3082d10 |
|
| Author: | paso750 [ Sat Oct 27, 2012 10:16 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
Hello Don. Welcome to the forum. That`s an ambitious project you`re planning. I hope you get it done. I really have respect for your plans of the build and to keep on riding ! G. |
|
| Author: | persempre907 [ Sat Oct 27, 2012 10:20 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
Welcome aboard Don. I also am sorry to hear about your accident, but happy (and a little amazed) you keep interest about the bikes. I would restore the bike keeping the rare blue metal stock colour. About the decals. I bought those decals from ebay for my 907. They are decent but a bit lesser than the stock ones. So, they are good if you mean repaint the whole bike. Ciao |
|
| Author: | paso750 [ Sat Oct 27, 2012 10:39 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
| Author: | 900streetfighter [ Sat Oct 27, 2012 12:13 pm ] |
| Post subject: | Re: Hello all. New guy to the forums |
The 750 I saw was red. Pretty sure it was 916 arm. I saw it at Assen Clubrace about 5 years ago. I'll find the pic. K. |
|
| Author: | PasoRoo [ Sat Oct 27, 2012 1:48 pm ] |
| Post subject: | Re: Hello all. New guy to the forums |
G'Day Don, Welcome to the forum! Lots of knowledgable folks here who are more than willing to help out with information. It has allowed me to keep my Paso running and on the road. If you decide to go ahead with your Can-Am project I'd love to see some photos! Cheers, Mike |
|
| Author: | Rhino [ Sat Nov 03, 2012 10:22 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
Hi Don Sorry to hear about the accident but full marks for the sheer testicles to keep on going Where are you? |
|
| Author: | 900streetfighter [ Sun Nov 11, 2012 12:17 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
Found the pic of single sided 750. Very similar style panel chop to the yellow bike. Assen DCN Clubrace '09. Keith. |
|
| Author: | paso750 [ Sun Nov 11, 2012 10:56 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
That just looks so wrong ... G. |
|
| Author: | Rhino [ Sun Nov 11, 2012 11:08 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
I agree completely with paso750 . . . Just because you can do something doesn't mean you should |
|
| Author: | giocast [ Sun Nov 11, 2012 2:04 pm ] |
| Post subject: | Re: Hello all. New guy to the forums |
Hello Don I am in total awe of your tenacity and sheer determination and you serve as a true inspiration to all us whingers with a few scratches. I look forward to seeing pictures of your handywork. Chris |
|
| Author: | bobst2 [ Sun Nov 11, 2012 10:34 pm ] |
| Post subject: | Re: Hello all. New guy to the forums |
hi you can get replacement decals from England excellent quality and a decent price. iwill find the name and send you a pm |
|
| Author: | ducinthebay [ Tue Nov 13, 2012 2:34 am ] |
| Post subject: | Re: Hello all. New guy to the forums |
Don, A very cool project concept. I can envision it now. You will have plenty of challenges in making the front end. My recommendation would be to leave the back end alone and just find a 16" automotive tire to put on the back. There will be plenty of rubber on the road for the horsepower (about 7 times the contact patch of a motorcycle tire) and the tires will be a lot cheaper than motorcycle tires. A 165 or 175 low profile car tire would probably fit just fine. The whole rig will be plenty light compared to a car anyway. Once you get the front dialed in, you could revisit the back end if it needs it. I think the Paso would make a great trike. The body is set up well to meld into the lines of front end like a Can Am Spyder. Consider stealing parts from snowmobiles for the front end. Cheers, Phil |
|
| Author: | paso750 [ Tue Nov 13, 2012 3:47 pm ] |
| Post subject: | Re: Hello all. New guy to the forums |
sidecars with car wheels/tires viewtopic.php?f=9&t=5110 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|