| ducatipaso.org http://ducatipaso.org/forum/ |
|
| oil coolers (replacement) http://ducatipaso.org/forum/viewtopic.php?f=1&t=8219 |
Page 1 of 1 |
| Author: | superleggera [ Tue Dec 31, 2019 9:13 pm ] |
| Post subject: | oil coolers (replacement) |
Probably 7+ years since I last posted! Looking for a pair of new replacement oil coolers for the 750 Paso. I searched and not much other than "clean the original" or "build your own". But with a damaged parts feeding through the engine and into the cooler, I'm not going to take a chance with bitsa in the old oil coolers and with the new engine installed. Cheap insurance with new coolers and new oil lines. Need two oil coolers for Arizona - a center mounted one beneath the horizontal cylinder isn't sufficient. My only option is to find two small oil coolers and modify the fairing nacelles that hold them. Just looking for a simpler option. |
|
| Author: | Mc tool [ Wed Jan 01, 2020 3:00 am ] |
| Post subject: | Re: oil coolers (replacement) |
Take your coolers and any hoses to a transmission workshop and ask them to flush them out . They regularly flush coolers . Personally I would just do it myself but if your lookin for peace of mind .... I would flush them with hot water 1st , in both directions ( that's both the coolers and the hoses ) and then compressed air. Any 2nd hand coolers may we'll have come off a chundered engine ......better the devil you know 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|