ducatipaso.org http://ducatipaso.org/forum/ |
|
‘New’ forum member http://ducatipaso.org/forum/viewtopic.php?f=1&t=8360 |
Page 1 of 1 |
Author: | BARONROJO [ Sun Jan 31, 2021 3:33 pm ] |
Post subject: | ‘New’ forum member |
Hi all, I’m the owner of a 1988 750 Paso from 2002 and registered to this forum from 2010. Although I’ve been working as a civil engineer for two decaes, I settled my own Ducati specialist workshop in 2016. In all these years, along with the Paso, I’ve become the owner of 4 more Ducatis: a MTS 1000 I bought new in 2004, an 851 ‘91 I bought in 2012 and later converted in a 851 Réplica powered by a 996 SPS engine and Monster S4R electrics/electronics, a 1986 F1 I bought in 2007 and my most recent, a Monster 695 intended for my customers’ use. After long years sitting uner a cover in my garage, I’ve decided to recomission my completely original (except for the exhaust cans) Paso, fitting a set of Mikunis from a donor M750. I’ll keep you informed of my progress! |
Author: | randtcastell [ Mon Feb 01, 2021 1:57 pm ] |
Post subject: | Re: ‘New’ forum member |
Welcome home! We look forward to photos of yer bikes. :^) |
Author: | Tamburinifan [ Mon Feb 01, 2021 9:52 pm ] |
Post subject: | Re: ‘New’ forum member |
Welcome! Nice stable. |
Author: | BARONROJO [ Thu Feb 04, 2021 8:14 pm ] |
Post subject: | Re: ‘New’ forum member |
This is my 851 SP3 Réplica / 996 SPS hybrid bike built by myself from the con-rod bearings up... (sitting at my workshop) My good-old all-rounder MTS 1000... My cool F1 (on the right) And... for not I haven’t any picture of the Paso or the min-monster (at the painter’s) |
Author: | randtcastell [ Fri Feb 05, 2021 4:10 pm ] |
Post subject: | Re: ‘New’ forum member |
Hermoso!! |
Author: | BARONROJO [ Tue Feb 09, 2021 5:12 pm ] |
Post subject: | Re: ‘New’ forum member |
And the Paso undergoing resurrection works.... She's been started today after about 8-10 years. Just one cylinder working due to the Mikunis having been found not as clean as I supposed I bought then, but nothing that a deep cleaning -in process- can't solve. So, next steps will be easy! |
Author: | paso750 [ Wed Feb 10, 2021 4:13 pm ] |
Post subject: | Re: ‘New’ forum member |
would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks. G. |
Author: | Frank.61 [ Wed Feb 10, 2021 9:05 pm ] |
Post subject: | Re: ‘New’ forum member |
Wow, and I thought I had a nice man cave annex workshop! Love the coffee table, if I was a little younger I would follow suit. Is that a private workshop? Impressed. Love your 851 ..... good luck with the Paso and let the pictures keep comming! Buena suerte! Frank |
Author: | Derek [ Thu Feb 11, 2021 11:21 am ] |
Post subject: | Re: ‘New’ forum member |
Author: | BARONROJO [ Thu Feb 11, 2021 5:22 pm ] |
Post subject: | Re: ‘New’ forum member |
Author: | BARONROJO [ Thu Feb 11, 2021 5:25 pm ] |
Post subject: | Re: ‘New’ forum member |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |