IMG_24112019_193940_(1024_x_768_pixel).jpg [ 229.99 KiB | Viewed 37821 times ]

IMG_24112019_194226_(1024_x_768_pixel).jpg [ 261.35 KiB | Viewed 37820 times ]

IMG_29112019_151111_(1024_x_768_pixel).jpg [ 270.37 KiB | Viewed 37780 times ]

First outing in a while, you beauty off to protwin tomoz, yeeha

IMG_29112019_154308_(1024_x_768_pixel).jpg [ 225.62 KiB | Viewed 37778 times ]

The bike is getting better and better
Interesting that the thread pattern of the front and rear tire is reversed.

Yeah I know, but its correct according to rotation marks,a few have mentioned it, may be start up this week bar the paintwork

IMG_05122019_182613_(1024_x_768_pixel).jpg [ 219.3 KiB | Viewed 37689 times ]
Yep I wreckon you're onto it, I bought the paint the other day,took the all the bodywork to graphics place today on recommendation from the guys I get the paint off, so things are still moving in the right direction . Setting up the recently acquired single seat piece and how to fabricate the backrest piece,I'm planning to reglass/ bog all the predrilled fixings and then redrill as most are pretty flogged out, bit of prep needed but if I nail that I've got half a chance of a pretty good paintjob

IMG_13122019_125541_(1024_x_768_pixel).jpg [ 191.52 KiB | Viewed 37550 times ]
Just starting the paint preparation process as I know it, 240 wet/ dry to remove clearcoat,decals, in the case of the fairings now I'm removing the white over a full coat of red then the red to end up with mainly grey/ originally primer, on fibreglass, careful not to expose fibres as they are later hard to get rid of, then some fiberglass repair/ strengthening on the back of panels and finish with car filla on the finish side, I've been standing this panel for a good hour and a long way to go

IMG_14122019_121211_(1024_x_768_pixel).jpg [ 213.7 KiB | Viewed 37410 times ]

IMG_14122019_121912_(1024_x_768_pixel).jpg [ 139.85 KiB | Viewed 37409 times ]

IMG_16122019_183809_(1024_x_768_pixel).jpg [ 149.24 KiB | Viewed 37408 times ]

IMG_19122019_193745_(1024_x_768_pixel).jpg [ 200.51 KiB | Viewed 37407 times ]

Lots of block sanding with 240 wetdry, good few hours work, I used the orbital on the right side fairing which made it easier getting the clear coat and old decals off, those 2 panels are nearly ready to prime, just need to plug away , hope to pick the bike up from the shop tomoz, also the decals, happy days