IMG_27022018_165431.jpg [ 355.26 KiB | Viewed 11935 times ]
IMG_27022018_165315.jpg [ 344.69 KiB | Viewed 11935 times ]
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Oil leaks 89 900 ss http://ducatipaso.org/forum/viewtopic.php?f=13&t=7723 |
Page 18 of 34 |
| Author: | HIGHWAY89 [ Tue Feb 27, 2018 8:51 am ] |
| Post subject: | Re: Oil leaks 89 900 ss |
As it turns out this cap off the old chrome mesh filter fitted perfectly so pretty happy with that , got the brake discs , the back is spot on but not refit yet as waiting on new bolts , front are about 3 mm thicker ally rotors than old so I have got to either see if I can counter sink bolts on rev counter side or shave down the rev counter spindle, so jury out on that till I see Justin and see if he can mill the rotors enough , the discs were designed for some Honda but all measurements same except for aforementioned, I hope we can mill countersink as the review I saw from a guy who races a fair amount gave the thumbs up |
|
| Author: | HIGHWAY89 [ Tue Feb 27, 2018 9:00 am ] |
| Post subject: | Re: Oil leaks 89 900 ss |
IMG_27022018_165431.jpg [ 355.26 KiB | Viewed 11935 times ] IMG_27022018_165315.jpg [ 344.69 KiB | Viewed 11935 times ] |
|
| Author: | HIGHWAY89 [ Tue Feb 27, 2018 9:17 am ] | ||
| Post subject: | Re: Oil leaks 89 900 ss | ||
IMG_27022018_171321.jpg [ 445.48 KiB | Viewed 11934 times ]
|
|||
| Author: | HIGHWAY89 [ Tue Feb 27, 2018 9:18 am ] |
| Post subject: | Re: Oil leaks 89 900 ss |
IMG_27022018_171510.jpg [ 369.33 KiB | Viewed 11934 times ] |
|
| Author: | HIGHWAY89 [ Tue Feb 27, 2018 9:24 am ] |
| Post subject: | Re: Oil leaks 89 900 ss |
IMG_27022018_172215.jpg [ 362.8 KiB | Viewed 11934 times ] I put my specs on and realized my pic of front disc was back of disc so here's the front |
|
| Author: | HIGHWAY89 [ Sun Mar 04, 2018 5:22 am ] |
| Post subject: | Re: Oil leaks 89 900 ss |
In the pic of the swingarm you will see the small patch I put on the hairline crack which started at the huggers threaded hole |
|
| Author: | HIGHWAY89 [ Tue Apr 03, 2018 12:58 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
IMG_03042018_205049.jpg [ 407.47 KiB | Viewed 11806 times ] |
|
| Author: | HIGHWAY89 [ Tue Apr 03, 2018 1:14 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
I've started putting the intestines back the the beast starting at the ignition setup , I've got the rear wheel and chain sorted, f all work so slowing up the progress again but wiring can go in and carbs out to rebuild ( mikunis), front wheel should be back together soon , fork oil good and sorted ( I think) , definitely getting a little forward momentum |
|
| Author: | HIGHWAY89 [ Mon Apr 09, 2018 12:21 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
IMG_09042018_201420.jpg [ 479.65 KiB | Viewed 11706 times ] Big job replacing the harness after so long , memory fades and strip photos , wire colours and some new connections etc look alien but I'm starting to remember and win I think , cash flow slowing me up as usual but I know I'm no orphan there |
|
| Author: | HIGHWAY89 [ Mon Apr 09, 2018 1:31 pm ] | ||
| Post subject: | Re: Oil leaks 89 900 ss | ||
Dummy run on the instrument panel at this stage , really struggling to find a new warning lights graphics as mine was shot , surprised at lack of spares considering so many years/ models shared from ducati
|
|||
| Author: | HIGHWAY89 [ Mon Apr 09, 2018 1:39 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
IMG_09042018_213412.jpg [ 331.63 KiB | Viewed 11704 times ] |
|
| Author: | HIGHWAY89 [ Mon Apr 09, 2018 2:14 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
Probly want to hit me every time I say rev counter |
|
| Author: | HIGHWAY89 [ Mon Apr 23, 2018 1:08 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
The harness is progressing well all good ther but after repaintingthe needle and bezel I crackedthe glass while trying to recrimp the Speedo bezel , I've bought a good dash with anice warning light graphics panel, I think I need to get new glass and bezels and find someone to professionally crimp both instruments |
|
| Author: | HIGHWAY89 [ Mon Apr 23, 2018 1:17 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
I need to finish the dash to button up the front of the harness, on another note do I need to replace the engine breather setup or can I just convert to a short tube and a small filter as I've seen on some pics of similar bikes? |
|
| Author: | paso750 [ Mon Apr 23, 2018 10:03 pm ] |
| Post subject: | Re: Oil leaks 89 900 ss |
Imho the best solution would be to keep the original oil catch tank and install a small filter to its exit. At least so oil blown out of the engine can run back. Only a tube and filter on the breather will work as well but sometimes the filter saturates with oil and it can run down the tube. In worst case it'll get on the rear tire. |
|
| Page 18 of 34 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|