Frame Cutting/Chopping

Mustang505 · **Posted:** Mon Sep 26, 2011 1:39 am

I want to cut the rear section of my frame so the TT2 rep seat looks better once fitted - see pic below. I know some of you guys have cut the frame for various reasons, cutting that rear section loop under the rear of the seat, is it an issue frame structure/strength wise? My guess that part of the subframe is just there for plastic tray that was there?

Anyone thoughts before i take the angle grinder to it!
thanks

ducinthebay · **Posted:** Mon Sep 26, 2011 4:30 am

That whole rear section is just to support you and your lady friend. You can take a lot of tubing out of it and still be good.
Look at some of the later model frames, and you will see a lot less frame in back, especially if you are putting on a single seat. It looks a lot like legacy ideas to me.

Cheers.

wil-duc · **Posted:** Fri Dec 30, 2011 7:31 pm

Hej Clive, wy not use a 750 f1 replica race seat, that wil fit just fine, no cutting.
thats almost the same, but a littel bit wyder at the and, and a bit longer.
cheers, willem.

higgy · **Posted:** Fri Dec 30, 2011 10:28 pm

any metal past the swingarm pivot is to hang lights and keep your ass off the tire :thumbup:

Back in the day it also supported the upper shock mount, very important to keeping your ass off the ground once upon a time, ina galaxy far far away :beer:

ducbertus · **Posted:** Sun Jun 10, 2012 6:17 pm

Hi Higgy,

you're right. I did this a while ago. Due to lot of things I didn't finish the project sofar.

angelix · **Posted:** Mon Jun 11, 2012 10:06 am

AH!!!

I went all the way....

its nearly finished, 10 years working on this thing. :wacko:

Andrew2 · **Posted:** Tue Jun 12, 2012 8:18 am

Bock900r · **Posted:** Tue Jun 12, 2012 7:33 pm

ducinthebay · **Posted:** Wed Jun 13, 2012 2:08 am

So is it basically a 748 with a 1989 Sport engine? (which happens to be 748cc)
What is left of the Sport?

Cheers, Phil

angelix · **Posted:** Wed Jun 13, 2012 4:47 pm

ducbertus · **Posted:** Sun Jun 17, 2012 7:08 pm

Hi Angelix,

very nice bike. Indeed you went all the way.
you finished, where I just started a long time ago.
meanwhile I collected parts such as
998R Öhlins front end incl. radial calipers
5 spoke magnesium Marchesini's
S4R swing arm (Aluminum sculputure)
changed the frame end to adapt the S4R link instead of the original cantilever.
But first I have to finish some other projects such as proper lathe to machine parts.

Bertus

Mustang505 · **Posted:** Sun Jun 17, 2012 7:27 pm

hey Bertus
where are you in Holland? i'm currently in Amsterdam on business for 2 weeks. hoping to get to Assen for the dutch TT before i fly home.

ducbertus · **Posted:** Mon Jun 18, 2012 4:34 pm

Hey Clive,

I'm in the eastern part of Holland app. 100 km from Amsterdam. It's small town called Holten, directly near the highway A1/E30 Amsterdam-Berlin. Visiting Assen is also my goal, probably by bike (907) together with my friend on his 750ss or 888SP3.

I heard great things about New Zealand. my son was there a couple of months as a apprentice in Invercargill on a dairy farm.

PM me if you want to meet, for instance in the weekend.

Best regards,

Bertus

ducbertus · **Posted:** Wed Jun 20, 2012 4:21 pm

hi Clive,

Still enjoying Holland?
how are you're TT plans?

maybe we can arrange something. it would be nice to meet you.

Bertus

micklm · **Posted:** Tue Oct 23, 2012 9:42 am

Angelix - That is a most ambitious build. Awesome.

ducbertus - a lot of respect for you daring to cut the frame so far back. I'd love to see the finished product.

Has anyone else got photos of frame cut jobs? I'm considering cutting an SS frame down for a TT2 replica, and would be interested to see what has worked for others.

Thanks,

Mick

Frame Cutting/Chopping

Who is online