| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Kokusan rubber holder http://ducatipaso.org/forum/viewtopic.php?f=13&t=8230 |
Page 1 of 1 |
| Author: | Kmamac [ Wed Feb 19, 2020 1:24 pm ] |
| Post subject: | Kokusan rubber holder |
I’m in need of a pair of the rubber holders for the kokusan ignition boxes. The two I picked up on eBay as part of my project to get this 750 sport up and running did not have them. Are there any generic holders that could work. Don’t really want them flapping around in the tray they sit on. Last resort will be a pair of rubber bands! 
|
|
| Author: | randtcastell [ Thu Feb 20, 2020 2:00 am ] |
| Post subject: | Re: Kokusan rubber holder |
could you adapt something like this: https://www.amazon.com/YHSWE-Silicone-S ... 6G8TMTN6KQ |
|
| Author: | paso750 [ Thu Feb 20, 2020 10:13 am ] |
| Post subject: | Re: Kokusan rubber holder |
Many asian scooters and other small bikes use similar CDI modules. I don't know the dimensions of the Kokusan BB1105 units but maybe one of these will fit: from France https://www.maxiscoot.com/support-caout ... 20882.html https://www.maxiscoot.com/support-caout ... 20881.html same from Germany https://www.geiwiz.de/product_info.php? ... d=14887234 https://www.geiwiz.de/product_info.php? ... d=14887233 Surely there're many shops for scooter parts in the UK as well. I'd try there. Just beware that the mounting slot is on the long side, not in a 90° angle and close to a corner. This one for example may not work as the mounting bracket it's installed on is probably too short. https://www.shirebikes.co.uk/products/h ... h-z50j-12v But again, check the dimensions of the Kokusan CDI units first. G. |
|
| Author: | Kmamac [ Thu Feb 20, 2020 5:39 pm ] |
| Post subject: | Re: Kokusan rubber holder |
Thanks guys- good call. I will look into these options. Many thanks - much appreciated Keith MM |
|
| Author: | Mc tool [ Thu Feb 20, 2020 6:49 pm ] |
| Post subject: | Re: Kokusan rubber holder |
Either double sided foam tape or velcro with adhesive backing. Real long shot but I did have some of those left from when I parted my 900ss, and I cant remember what happened to them,so let me have a rummage .....they may have gone with the modules. |
|
| Author: | angelix [ Sat Feb 22, 2020 11:11 am ] |
| Post subject: | Re: Kokusan rubber holder |
I think I have a couple of sets in my "magic box" (where I put all the stuff i dont need but might be useful for other purposes) If I find them I will let you know. I Am in GB , just in case. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|