Sprocket cover interchangeable?

Jorian · **Posted:** Tue Oct 01, 2019 1:55 am

750 and 906 Pasos have different part numbers for this part.
But can one from a 750 fit a 906, or is there an important difference?

Mc tool · **Posted:** Tue Oct 01, 2019 10:59 pm

Some times the quickest way to find out is to go to good ole eBay ( or elsewhere ) and see if you can't view pix of parts for sale. I thing the 750 and the 906 motor are based on different crankcases so it probly is different

Derek · **Posted:** Wed Oct 02, 2019 8:45 am

The cover on the 500 and 600 Pantah engines are certainly different. I'd assume that the 750 Paso engine which is based on the Pantah engine is also different.

paso750 · **Posted:** Wed Oct 02, 2019 4:34 pm

Jorian · **Posted:** Sun Oct 06, 2019 9:02 am

The Paso 906 here has the clutch slave cylinder on the right.
So, a Paso 750 sprocket cover should be OK.
Thank you for the info.

Duc906 · **Posted:** Tue Oct 08, 2019 11:19 am

paso750 · **Posted:** Tue Oct 08, 2019 3:58 pm

Ken, you're right. My bad.

Jorian · **Posted:** Thu Dec 12, 2019 6:07 am

The sprocket cover was described as fitting Paso 750 and 906.
It fits perfectly, with a cutout for the dummy clutch slave cylinder.

Sprocket cover interchangeable?

Who is online