| ducatipaso.org http://ducatipaso.org/forum/ |
|
| 906 cdi http://ducatipaso.org/forum/viewtopic.php?f=2&t=3610 |
Page 1 of 1 |
| Author: | jimfowler [ Thu Sep 17, 2009 1:44 pm ] |
| Post subject: | 906 cdi |
i know this belongs in the "for sale/etc..." forum but i'm getting desperate. i really need to track down a cdi for a 1990 906. if anybody has and advice, i'm all ears. thanks. - jim |
|
| Author: | paso750 [ Thu Sep 17, 2009 2:43 pm ] |
| Post subject: | Re: 906 cdi |
| Author: | higgy [ Thu Sep 17, 2009 10:36 pm ] |
| Post subject: | Re: 906 cdi |
Techauto,289usd and lifetime warranty now |
|
| Author: | micklm [ Fri Sep 18, 2009 11:38 am ] |
| Post subject: | Re: 906 cdi |
Mate, I've seen posted on this forum another option to use the Ignitech TCIP4. On the advice of a mate who uses it on his 900SL (and Brad Black from the old moto-one perfromance notebook site in Australia), I've gone this route for the ignition system for a 1994 supersport I'm rebuilding. Not sure what would be involved for using this on a Paso but there is some further discussion on this site about the TCIP4, notably here: I know this is the commonly recommended option for the mid 1990s supersports, but this may be a bad lead for the Paso depending on if it works and the various complexities of getting coils, flywheel etc for your paso to integrate. Maybe someone else can advise if they have used it successfully for a Paso? Would be good to know as I had this in my mind as a fallback option if my CDI dies. cheers, Mick |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|