Hi Doug,

I know the Marzocchi no. is still available, but finding a shop that does business with Marzocchi in Holland has proven difficult, Beemer shops and Ariete suppliers can be found in abundance over here.

Unfortunately I haven't got the Beemer no. for the dust seal, I did't write that down at the time and I cannot find the link to the specific web page anymore, seems to have been removed. But any BMW spcialist should be able to come up with the number for you.

Michiel

I realized AGAIN this eve, that 750 Pasos oil seal DONT fit to 907 at all! 750 seals are too thick. 907 need thinner seal and it can be found from Ducati dealer, but how about dust scrapers? Are they still available to 907 from Ducati, or no ??????

the 907 has a stepped seal and is 7 mm at the spring ring at the outside and 10.? at the stanchion.
a 10 mm high seal only fits if the steel washer is left out.
dustscrapers should be available at the Ducati dealers. mine hat several sets on stock.

ducbertus

+1, bought a pair of scrapers last year from my Duc dealer.

yesterday I was in a shop of JCB earth moving equipment looking for hydraulic connections were I saw dustscrapers very similar to the M1R types. dimensions I remember were 52 x 42x 10. So these parts must be available on regular bases in shops specialized in hydraulic parts.

Ducbertus

I wonder if they fit correctly.
Ciao

I still have my old ones, so I could compare them one to one.
note the brand and let you know

Ducbertus