New here

persempre907 · **Posted:** Wed Dec 14, 2011 9:41 pm

Nice bike, compliments :thumbup:

Gert, if you are interested, somewhere I have the same rack mount.
Asap, I will send you some pic.
Ciao :beer:

Derek · **Posted:** Wed Dec 14, 2011 9:46 pm

Tamburinifan · **Posted:** Thu Dec 15, 2011 11:40 am

Thx, Francie!

Derek, no hurry at all.

Just courious since I have similar top case frame.

Derek · **Posted:** Sun Dec 18, 2011 1:37 pm

Gert,

Here are some pictures of the top case frame mounts.

At the footrest hanger the lug on the top case mount is clamped between the hanger and the subframe at the rear bolt with a similar thickness spacer (washer) fitted at the front bolt.

At the back there is a bracket that clamps around the lower subframe tube.

JoKing · **Posted:** Sun Dec 18, 2011 3:57 pm

Wooooo..... he as an original tool kit!

Derek · **Posted:** Sun Dec 18, 2011 4:05 pm

paso750 · **Posted:** Sun Dec 18, 2011 5:28 pm

that looks like a GIVI luggage carrier, but if it is it seems it`s not mounted correctly (at the footpegs).
http://www.box.com/shared/4go2jdg17i

G.

Derek · **Posted:** Sun Dec 18, 2011 7:39 pm

Jaffa · **Posted:** Sun Dec 18, 2011 10:26 pm

paso750 · **Posted:** Mon Dec 19, 2011 6:58 pm

If it`s mounted like that I`d at least put a washer with the same thickness under the other footpeg bracket bolt as otherwise you`ll have stress on the material and the two bolts.

G.

Tamburinifan · **Posted:** Wed Dec 21, 2011 2:37 am

My mounts:
http://www.ducati.ms/gallery/showimage. ... euser=9490

New here

Who is online