ducatipaso.org http://ducatipaso.org/forum/
Left switch connector plugs http://ducatipaso.org/forum/viewtopic.php?f=3&t=2747	Page 1 of 1

---

Author:	osapitacud [ Wed Sep 24, 2008 10:38 am ]
Post subject:	Left switch connector plugs
Hi all, I'm looking to replace the 9 pin wiring connectors (male/female) used for the left switch. Does anyone know if these connectors are obtainable? They may be a standard connector or are they Ducati specific? I know I can get cheap connectors to do the job but I am hoping to keep it original should I need to replace the switch again. Cheers, osapitacud

---

Author:	englishstiv [ Wed Sep 24, 2008 10:35 pm ]
Post subject:	Re: Left switch connector plugs
Personally I would replace the connector with the best quality replacemant you can find and buy another if you think you will have to replace it in the future, I am about to change all of mine as I have found that the pins seem to corrode and lose their connection far too easily. I have had a real problem with the tank connector especially. If you wish to keep some degree of conformity then upgrade with a modern ducati replacement use the shell and body and wire it accordingly.

---

Author:	osapitacud [ Fri Sep 26, 2008 10:41 am ]
Post subject:	Re: Left switch connector plugs
I can easily upgrade the plugs but thought that if original plugs were still around that would be the best option.

---

Author:	ducbertus [ Fri Sep 26, 2008 9:48 pm ]
Post subject:	Re: Left switch connector plugs
hi osapitacud, As these connectors have an rather open structure I put a lot of petroleum jelly into them, which make lasting much longer. I'm not sure you can get 9-pins sealed connectors. But maybe you can split it a 5-pole and a 4-pole sealed connector. not the most pretty solution, but effective. I started to replace existing connectors with sealed ones to improve reliability. Works well. ducbertus

---

Page 1 of 1	All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/