I knew i waited too long to order one of those
oh well
doug
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| FIM quits! http://ducatipaso.org/forum/viewtopic.php?f=3&t=3055 |
Page 1 of 1 |
| Author: | Tamburinifan [ Fri Feb 13, 2009 11:35 am ] |
| Post subject: | FIM quits! |
"After 20 years in the motorcycle industry, UltiMap (also known as FIM or Fuel Injected Motorcycles) has ceased manufacturing." http://www.fuelinmoto.com.au/ The 907`s chips will be valuable... |
|
| Author: | Stingray230SX [ Fri Feb 13, 2009 4:20 pm ] |
| Post subject: | Re: FIM quits! |
I knew i waited too long to order one of those oh well doug |
|
| Author: | Finnpaso [ Fri Feb 13, 2009 4:25 pm ] |
| Post subject: | Re: FIM quits! |
Luckily i have AMB and 907IE chip  , but unluckily my ST4S ECU is just there in Australia in "quarantee fixing" and its one of those "too old ones"  I have in my ST2 also FIM chip , but its copy protected REALLY BAD news !!!!
|
|
| Author: | Laddie907 [ Fri Feb 13, 2009 4:33 pm ] |
| Post subject: | Re: FIM quits! |
wow...didn't expect that... I have the original FIM 907ie chip and a later version "piggy-back" type.. He also made a Duc 907 "standard" copy for me to test. sorry to see FIM drop support for the older machines... |
|
| Author: | Tamburinifan [ Fri Feb 13, 2009 5:17 pm ] |
| Post subject: | Re: FIM quits! |
I checked FastbyFerracci, they still had the 907 chip listed. MyECU is also an option, not as easy as chip, though... |
|
| Author: | Finnpaso [ Fri Feb 13, 2009 7:28 pm ] |
| Post subject: | Re: FIM quits! |
I can make those Ferracci chips, if someone need them. But only for resonable price. 
|
|
| Author: | persempre907 [ Sat Feb 14, 2009 2:00 pm ] |
| Post subject: | Re: FIM quits! |
| Author: | Stingray230SX [ Sun Feb 15, 2009 12:41 am ] |
| Post subject: | Re: FIM quits! |
somewhere on an old harddrive i have those FIM or similar .bin files to make those chips but i just never found the time to get the right e-proms or a a e-prom "burner"..... doug |
|
| Author: | Finnpaso [ Sun Feb 15, 2009 11:00 am ] |
| Post subject: | Re: FIM quits! |
| Author: | persempre907 [ Sun Feb 15, 2009 5:39 pm ] |
| Post subject: | Re: FIM quits! |
| Author: | Stingray230SX [ Sun Feb 15, 2009 8:07 pm ] |
| Post subject: | Re: FIM quits! |
ok here is a pic of the eproms needed....... and i found 2 files in my computer(1)907 custom chip and (1)907 euro chip, both of these are .obj files but when viewed in notepad seem to be hexidecimal code so i think the process was change the file extention to .bin and burn to an eprom....i got these off the net a few years ago and never did anything with them but if someone wants them let me know doug |
|
| Author: | Finnpaso [ Mon Feb 16, 2009 3:41 pm ] |
| Post subject: | Re: FIM quits! |
As they seem to be custom chips, they are quite useless, if u dont know, what mods have done to bike(from where are those).... Anyway U can try them in bike and i quess, that nothing very bad cant happen... better dyno bike with those and see, what is best one... 
|
|
| Author: | Stingray230SX [ Mon Feb 16, 2009 4:15 pm ] |
| Post subject: | Re: FIM quits! |
yea i am not sure of the programming on the custom chip......i thought i had the FIM copy but that is the picture i found and the file name of the actual .obj file matches the "custom chip" labeling so again..i am not sure but hey it might be for just slipons and/or airbox mods etc..... but if anyone wants to play around there it is............ if i can find a couple of the blank eproms i might try to get a eprom burner/programmer and try it later....cant right now as i just bought a 1995 softtail project bike and its gonna take up most of my time/money for the next couple of months. doug |
|
| Author: | Tamburinifan [ Mon Feb 16, 2009 5:41 pm ] |
| Post subject: | Re: FIM quits! |
| Author: | Finnpaso [ Mon Feb 16, 2009 7:32 pm ] |
| Post subject: | Re: FIM quits! |
As You know, FIM fighted from same markets, as FBF, so its nothing new, that FIM "try" blackpoint little FBF.... Normal in business world.....
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|