Sorry, bike related...

Want to overhaul my clutch master reservoir and found the idle lever attached to it.
How do I separate them?
No screws visible or are they hidden?

Found out myself :

You loosen the reservoir, move the idle lever so it slips out of its seat
and then you`ll see the screws f the idle assy to be removed from clutch reservoir.

Well done Gert.

The trick is getting it all back in place again.

Good luck.

Yup,
and first to get the reservior repair kit in first....

A bit tricky and not so few words.
(Also, reservoir had to be worked over abit to make the repair kit work. )

The idle lever cover loosens when positioned halfways over piston/
dust cover in reservoir.
And of course reassembles in very same position, dust cover/piston must be compressed a bit.
The wire mount hole towards el controls is the one to use, why there is another, who knows...
All easier if wire loosened at TB`s.
So now, .

Did You get repair kit ??? From where??? What price?

Dont too much! I have done it sometimes and suffered about 4 days from it... Cant eat anything for 2 first days... then little by little same time quessing, does all come out very fastly, or after some minutes...

Kit from Bevelheaven, look f Brake rel parts-Brembo, 25,50 US$.
Think Yoyodyne also has.

I only drink Danish green Carlsberg, not a big bottle of Kosken in a sauna
so I`m usually OK.

But more work would be done without the beer, that`s for sure...