| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Rear spring http://ducatipaso.org/forum/viewtopic.php?f=3&t=3812 |
Page 1 of 1 |
| Author: | Tamburinifan [ Wed Dec 23, 2009 1:08 am ] |
| Post subject: | Rear spring |
Got some info about the Öhlins shock f a 750 Paso fr horses mouth (Öhlins, Sweden). Original 42Nm, +90kg rider 45Nm. Spring should have 25mm preload. I`ve ridden a 750 w original, restored Öhlins. Seemed soft but worked really OK. My question, why the soft spring? Is the linkage on a Paso so special? All other springs is about 90-110NM, on Hyper Ducs round 70  Wondering cause I`ve bought a Penske f a 750Paso. |
|
| Author: | Finnpaso [ Wed Dec 23, 2009 7:57 pm ] |
| Post subject: | Re: Rear spring etc |
I am wondering same thing every time i push down my 750 Paso grab handle in my garage, as its much softer compared to 907IE original Marzhocci unit... I feel also very comfortable that Öhlins in my 750 Paso, but i drive it alone allways without so much weight(i am about 78Kg's) and with my 907IE i carry near allways 2 sidebags with full of stuff and it feels also good with Marzhocci Duo remoto unit... I have installed Öhlins(from 750 Paso) to my one 907IE, but havent tested yet, sorry. As i know, all rear linkages are same in 750 Paso and 907IE  At least they look identical, but havent check from microfilm!
|
|
| Author: | Tamburinifan [ Fri Jan 01, 2010 1:38 am ] |
| Post subject: | Re: Rear spring |
So, anyone know what rate the standard spring is? & f a 95kg rider? |
|
| Author: | injected [ Tue Jan 05, 2010 3:04 pm ] |
| Post subject: | Re: Rear spring |
I believe 9.0kg/mm is standard on the 907. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|