but a dvom may not be the BEST tool
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| How to Set the TPS for the 907 http://ducatipaso.org/forum/viewtopic.php?f=3&t=4759 |
Page 1 of 1 |
| Author: | Fast Eddie [ Tue Apr 19, 2011 7:45 pm ] |
| Post subject: | How to Set the TPS for the 907 |
Can anyone tell me what the factory settings are for the 907 using a digital volt meter? I'm going to try to see if the TPS is off and if that's why it dies when you nail the throttle or try to go over 5500 rpm. |
|
| Author: | Tamburinifan [ Wed Apr 20, 2011 1:12 am ] |
| Post subject: | Re: How to Set the TPS for the 907 |
http://home.kpn.nl/duran103/pics/p7-p8.pdf Basic setting is really only: Wind out idle & throttle stop screws til they don`t affect tps. Remove cover of big AMP connection into ECU. Measure + & - mV at pin 11 &17. When correct: 150 mV +/- 2mV. Recommended Idle mV I haven`t seen but around 270-350 mV seems plausible. Just set mine, idles at 300. |
|
| Author: | higgy [ Wed Apr 20, 2011 1:16 am ] |
| Post subject: | Re: How to Set the TPS for the 907 |
but a dvom may not be the BEST tool
|
|
| Author: | Tamburinifan [ Wed Apr 20, 2011 1:25 am ] |
| Post subject: | Re: How to Set the TPS for the 907 |
The best tool is ......? |
|
| Author: | higgy [ Wed Apr 20, 2011 2:21 am ] |
| Post subject: | Re: How to Set the TPS for the 907 |
analog |
|
| Author: | Fast Eddie [ Wed Apr 20, 2011 4:29 pm ] |
| Post subject: | Re: How to Set the TPS for the 907 |
| Author: | Tamburinifan [ Wed Apr 20, 2011 10:33 pm ] |
| Post subject: | Re: How to Set the TPS for the 907 |
|
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|