ducatipaso.org http://ducatipaso.org/forum/ |
|
Need front fork adjuster please. http://ducatipaso.org/forum/viewtopic.php?f=3&t=5547 |
Page 1 of 1 |
Author: | mwbunting [ Fri Sep 07, 2012 9:09 pm ] | ||
Post subject: | Need front fork adjuster please. | ||
Hi guys. Doing a ground up restoration on a 1991 907. Trying to keep original. I need a front fork adjuster. Have tried lots of parts people. Any help would be appreciated.
|
Author: | Tamburinifan [ Fri Sep 07, 2012 10:39 pm ] |
Post subject: | Re: Need front fork adjuster please. |
Could you be a bit more specific? |
Author: | paso750 [ Fri Sep 07, 2012 10:48 pm ] |
Post subject: | Re: Need front fork adjuster please. |
the rebound adjuster on the bottom of the right fork leg, I reckon. G. |
Author: | mwbunting [ Fri Sep 07, 2012 11:27 pm ] |
Post subject: | Re: Need front fork adjuster please. |
Thank you gentlemen. Yes the rebound adjuster on the bottom right (starboard) fork. Any help would be greatly appreciated thanks michael |
Author: | JoKing [ Sat Sep 08, 2012 7:31 am ] |
Post subject: | Re: Need front fork adjuster please. |
I id the same search for 1 1/2 years. When i gave up and overhauled the old one, two weeks later there was one on ebay. But what i recently found is a Paso-Anti-dive-unit, i do not know where the differences to the 907-part is: http://www.stein-dinse.biz/Komplettange ... 57149.html It is approx. 100$. |
Author: | 900streetfighter [ Sat Sep 08, 2012 1:24 pm ] |
Post subject: | Re: Need front fork adjuster please. |
I sold a set of legs with 1 that wasn't being used, (maxton convertion) I'll phone him and see if its available. |
Author: | mwbunting [ Sat Sep 08, 2012 8:55 pm ] |
Post subject: | Re: Need front fork adjuster please. |
Many thanks gents. JoKing I will look into it to see if they are compatible. Streetfighter 900 I'd be very greatful if you could do that. Thanks again. Michael |
Author: | 900streetfighter [ Sun Sep 09, 2012 5:05 pm ] |
Post subject: | Re: Need front fork adjuster please. |
He has it, contact details sent pm. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |