Hi.

While flicking through another Forum, I found a link to a crowd called Speedbleeder, Web address:

http://www.speedbleeder.com/

After spending an eternity getting the brakes bled after replacing the seals last year, these bleed valves look the goods. They also do a bleed valve for the clutch, which must be a good thing too. Has anyone found these bleed valves before and fitted them? They seem a pretty simple design and comparable in price to normal valves, it makes you wonder a bit?

Cheers.

Nick.

They sure look nifty , but you'd have a job convincing me that they will help bleeding "difficult " brakes or clutches . That ball valve only negates the opening and shutting of the bleed nipple as you bleed , I guess it would free up one hand to tear your hair out while its still not bleeding easily . A nice wee speck of bling all the same

Well Nick , you know what they say ... " Moss doesn't grow on a busy stone " , and anyhow I have to pay to get mine cut off ..... gotta be a good thing

Hmm, cheap enough to try.

No front brake bleed nipples for 907ie shown ???

yours are either M10x1 or M8x1.25

Pretty sure the Goldline brakes are M10*1. Same as the back brake.

P750 are further down the list too.

Waiting for an Email from them. Will give them a crack and see how they go.

Cheers.

Nick.

I ordered some last night. I'll put them on the Sport and the ST, and let you know how they do.

Cheers,
Phil

keep them covered and clean

purchased extra boots too.