Welcome and why should life be easy ?
Which hopefully answers your question
Also please take a look at this thread appreciate it's short notice ......
viewtopic.php?f=5&t=7091
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| New Purchase 907ie http://ducatipaso.org/forum/viewtopic.php?f=3&t=7107 |
Page 1 of 1 |
| Author: | Duc888 [ Mon Apr 13, 2015 2:25 pm ] |
| Post subject: | New Purchase 907ie |
Good Day, I have just purchased a very clean and tidy 907ie, which I am very chuffed with. Dare I say it, in some ways I prefer it to my 888. My questions are a bit of an idiot seeking information. To top up the oil and coolant, do I have to remove the whole right hand side fairing ( I know Ducatis can be impractical, but this seems a bit over the top, even for Ducati). Much obliged and try not to snigger too much, if there is a simple way that I have missed. Regards |
|
| Author: | englishstiv [ Mon Apr 13, 2015 9:24 pm ] |
| Post subject: | Re: New Purchase 907ie |
Welcome and why should life be easy ? Which hopefully answers your question Also please take a look at this thread appreciate it's short notice ...... viewtopic.php?f=5&t=7091 |
|
| Author: | Duc888 [ Tue Apr 14, 2015 11:59 am ] |
| Post subject: | Re: New Purchase 907ie |
Bugger! Thank you, much appreciated, not the answer I was hoping for, but not overly surprised. It could lead to some very long oil top up times at service station. Please be patient while I dismantle my bike to top up the oil and then re-assemble, sorry I forgot to check the coolant  I don't think I can make the wee jaunt to the mountains of deepest Lincolnshire, but will let you know. Thanks again. P.S I am based in Surrey if there are any like minded fools up for a Sunday bacon roll and tea (usually Newlands Corner, Arundel Bognor etc.) |
|
| Author: | 900streetfighter [ Wed Apr 15, 2015 3:11 am ] |
| Post subject: | Re: New Purchase 907ie |
You can get to oil top up cap by just removing the rhs seat panel. A length of 22mm pipe and funnel and jobs a goodun. |
|
| Author: | Duc888 [ Fri Apr 17, 2015 9:35 am ] |
| Post subject: | Re: New Purchase 907ie |
Thank you for the advice regarding using a piece of pipe and a funnel. |
|
| Author: | ducinthebay [ Sat Apr 18, 2015 3:55 am ] |
| Post subject: | Re: New Purchase 907ie |
| Author: | higgy [ Sat Apr 18, 2015 10:32 am ] |
| Post subject: | Re: New Purchase 907ie |
chuffed. To be very pleased, proud or happy with yourself, wasn't sure myself............Son got me one of those too smart for me phones,he thought I needed to be hip, still tryin to figure out how to answer phone calls but if I say chuffed to it it tells me what it means....er ah most of the time, others it says call who ? Not feelin hip at all 
|
|
| Author: | Duc888 [ Wed Apr 22, 2015 11:50 am ] |
| Post subject: | Re: New Purchase 907ie |
Re Chuffed: Very happy with the bike, it has now been christened El or Elly by my better half, probably something to do with Mexico or having an Elephant logo....anyway, I fear my other bikes may be getting a bit neglected. English, hopefully see you at the Ace, will also have better half with. |
|
| Author: | paso750 [ Thu Apr 23, 2015 8:39 am ] | ||
| Post subject: | Re: New Purchase 907ie | ||
I found this for a 851/888 once. Not a bad idea but the problem on a Paso would be where to mount it to. 
|
|||
| Author: | Duc888 [ Fri Apr 24, 2015 1:21 pm ] |
| Post subject: | Re: New Purchase 907ie |
Thanks for that. Good idea. I'll speak to a mate of mine who has a lathe and is a very good technical bodger. Cheers |
|
| Author: | paso750 [ Fri Apr 24, 2015 2:03 pm ] |
| Post subject: | Re: New Purchase 907ie |
I can take the dimensions if you`re interested. G. |
|
| Author: | Duc888 [ Sun Apr 26, 2015 9:20 am ] |
| Post subject: | Re: New Purchase 907ie |
Thanks G. If you could that would be a great help. Could you take another photo of the O ring part of the adapter (where it fits into the casing)? I suppose there may even be a market for them, especially if they can be used on other Ducs of that era. Cheers |
|
| Author: | paso750 [ Tue Apr 28, 2015 9:44 am ] |
| Post subject: | Re: New Purchase 907ie |
here you go https://app.box.com/s/kohcxdnssrfnyywofb8q4289mqehizfy Let me know if there`s anything missing. I make my drawings in Powerpoint as I`m faster in using it as a drawing program  As a consequence small details as chamfered edges aren`t shown. Therefore I added more pictures. My Powerpoint drawings are just for the dimensions.I`d hollow the cap out to make it lighter. G. |
|
| Author: | Duc888 [ Fri May 01, 2015 10:44 am ] |
| Post subject: | Re: New Purchase 907ie |
Thanks G. These are a lot more detailed than I was expecting. I will give them to my mate to see what he can do. Failing that, I have a friend who owns an engineering works and has CNC machines. Unfortunately he is in South Africa, but will send them to him as well. Thanks again K |
|
| Author: | paso750 [ Fri May 01, 2015 8:13 pm ] |
| Post subject: | Re: New Purchase 907ie |
K. you should verify if and where you can position it on the Paso and design a specific mounting bracket. (I forgot to mention the height of that bracket in the file. It`s 12mm but totally unrelevant for a Paso) |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|