|
It is currently Sun Apr 28, 2024 2:35 am
|
View unanswered posts | View active topics
Author |
Message |
paso750
|
Post subject: Re: front cylinder crack help!!! Posted: Mon Aug 03, 2015 9:37 am |
|
|
paso grand pooh-bah |
|
Joined: Sun Jul 18, 2004 12:00 am Posts: 5494 Location: southern Germany
model: 750 Paso
year: 1987
|
I`d contact the last owner and ask what was done to the bike. It would be good to know if the engine is still the original one or swapped for an ST2 engine but should be easy to identify as the 907ie engine is all black, the ST2 has silver cylinder heads, grey belt and engine covers and the clutch slave piston is different as well.
If it is a 907ie engine it would be good to know if a big bore kit was installed or if the original cylinders were bored to fit larger pistons. Then it also would be interesting to know if these parts were aftermarket or from a ST2.
You can go back to original cylinders/pistons (not knowing if the FBF chip is for a 944 kit) or have your new cylinder modified to fit the old piston. Looking at the grey areas on your old cylinders though I wonder if you`d also need new piston rings then.
|
|
Top |
|
|
Tamburinifan
|
Post subject: Re: front cylinder crack help!!! Posted: Tue Aug 04, 2015 10:14 am |
|
|
paso grand pooh-bah |
Joined: Thu Jun 21, 2007 12:00 am Posts: 1501 Location: Gothenburg, SWEDEN
model: 907 I.E.
year: 1991
|
I'd buy used ST2cyls & new rings to both pistons and reassemble.
_________________ Gert
907 I.E. -91 M900 -97 MTS 1100s -07
|
|
Top |
|
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|