We have a FAQ for that
viewtopic.php?f=3&t=2845&p=21207&hilit=fork+oil#p21207
viewtopic.php?f=3&t=2183
Some general info on fork rebuild with pictures for refence
viewtopic.php?f=3&t=3889
Seek and thee shall find
Hope this helps.
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| 907 fork oil air gap http://ducatipaso.org/forum/viewtopic.php?f=3&t=7301 |
Page 1 of 1 |
| Author: | katescottageiom [ Thu Oct 22, 2015 8:11 pm ] |
| Post subject: | 907 fork oil air gap |
What is the correct air gap for the front forks? My 907 owners manual says 160 mm and the workshop manual says 180 mm. |
|
| Author: | englishstiv [ Fri Oct 23, 2015 9:24 pm ] |
| Post subject: | Re: 907 fork oil air gap |
We have a FAQ for that viewtopic.php?f=3&t=2845&p=21207&hilit=fork+oil#p21207 viewtopic.php?f=3&t=2183 Some general info on fork rebuild with pictures for refence viewtopic.php?f=3&t=3889 Seek and thee shall find Hope this helps.
|
|
| Author: | katescottageiom [ Thu Oct 29, 2015 9:48 pm ] |
| Post subject: | Re: 907 fork oil air gap |
Thank you, now if I can find a left hand turn signal assembly maybe I can manage a few rides before the weather changes. |
|
| Author: | englishstiv [ Mon Nov 02, 2015 3:17 pm ] |
| Post subject: | Re: 907 fork oil air gap |
http://www.ebay.co.uk/itm/SPECCHIO-RETR ... SwDNdVxPnj This one is very expensive so make them an offer I would  . Not the original as they suggest but a "FAR" reproduction but it is new at leasthttp://www.ebay.co.uk/itm/Genuine-Ducat ... SwDNdVp8FA |
|
| Author: | Fraser [ Tue Nov 03, 2015 8:54 pm ] |
| Post subject: | Re: 907 fork oil air gap |
The turn signal assembly is still listed in the current FAR catalog, so is presumably still available. When buying some many years ago from FAR there was a minimum quantity, so ended up with 5 x off each side. But these are long gone. Cheers, Fraser. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|