| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Thermostat repair http://ducatipaso.org/forum/viewtopic.php?f=3&t=7884 |
Page 1 of 1 |
| Author: | paso750 [ Tue Mar 06, 2018 5:01 pm ] | |||||||||
| Post subject: | Thermostat repair | |||||||||
|
||||||||||
| Author: | Tamburinifan [ Tue Mar 06, 2018 10:38 pm ] |
| Post subject: | Re: Thermostat repair |
Thx f sharing, FAQ material. |
|
| Author: | paso750 [ Wed Mar 07, 2018 10:45 am ] |
| Post subject: | Re: Thermostat repair |
It is in the FAQs now. I posted here because many wouldn't have seen it. |
|
| Author: | Finnpaso [ Thu Mar 08, 2018 1:59 pm ] |
| Post subject: | Re: Thermostat repair |
VERY GOOD job, Gerhard  Ps. I still WONDER, that You have sooooo.... much time to be in internet with thesekind of things? 
|
|
| Author: | icekube1 [ Tue Dec 01, 2020 3:17 am ] |
| Post subject: | Re: Thermostat repair |
Just chiming in to say that I replaced my failed thermostat over a year and 3k+ km ago using the method described in the OP. A new ST2 t'stat was the donor. No silcone used on reassembly, the new O-ring from the donor and some care peening down the clamping ring was all that was necessary. Works a treat and no bodges required. |
|
| Author: | blazing928 [ Fri Dec 04, 2020 10:45 am ] |
| Post subject: | Re: Thermostat repair |
Glad my idea is still working...always a risk! Cheers nigel |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|