ducatipaso.org http://ducatipaso.org/forum/ |
|
New 907ie paso owner http://ducatipaso.org/forum/viewtopic.php?f=3&t=7931 |
Page 1 of 2 |
Author: | vainika [ Mon Jul 09, 2018 6:07 pm ] |
Post subject: | New 907ie paso owner |
Hello I just bought a 907ie project for myself. I was thinking of updating here how the project is going. Here's a picture of the condition of the bike for this moment. |
Author: | Nito [ Mon Jul 09, 2018 7:42 pm ] |
Post subject: | Re: New 907ie paso owner |
907 streetfighter looks very cool |
Author: | vainika [ Mon Jul 09, 2018 7:59 pm ] |
Post subject: | Re: New 907ie paso owner |
Author: | Nito [ Tue Jul 10, 2018 2:52 pm ] |
Post subject: | Re: New 907ie paso owner |
It looks a fun project, look forward to watching this progress |
Author: | ccmman [ Wed Jul 11, 2018 7:03 am ] |
Post subject: | Re: New 907ie paso owner |
Hi Vainika looking forward to hearing your progress. Post lots of pictures, and plenty of detail about what you are doing. So the engine is out, are you doing a complete strip and re-build? Any problems with electrics? My fuel pump in the tank was shot, they are available cheaply from other sources. I found mine on Gumtree (local version of ebay), for £25. It was a brand new spare for a Mazda MX5, which owner had sold. Good luck and have fun! |
Author: | vainika [ Thu Jul 12, 2018 3:41 pm ] |
Post subject: | Re: New 907ie paso owner |
Author: | Sergio Desmo [ Thu Jul 12, 2018 4:08 pm ] |
Post subject: | Re: New 907ie paso owner |
I see nothing missing on your picture. Passion, winter project, shite, it is July now have fun putting back the babe together and hope to see progresses soon |
Author: | vainika [ Sun Jul 22, 2018 4:18 pm ] |
Post subject: | Re: New 907ie paso owner |
Hello! little progress for my the summer winter project In Finland, we have a saying in the summer is short but little snowy I dismantled bike little more, But a frontend still need to be dismantled before I can paint the frame. Here are a few pictures |
Author: | Derek [ Mon Jul 23, 2018 8:41 am ] |
Post subject: | Re: New 907ie paso owner |
Pics are not showing! |
Author: | vainika [ Mon Jul 23, 2018 10:09 am ] |
Post subject: | Re: New 907ie paso owner |
Author: | Derek [ Tue Jul 24, 2018 8:40 am ] |
Post subject: | Re: New 907ie paso owner |
Yes, I can see the pictures now. I think I need to do something similar to my bike, the bodywork is immaculate but the frame underneath is beginning to look a bit scabby. Maybe next year |
Author: | vainika [ Wed Jul 25, 2018 4:22 pm ] |
Post subject: | Re: New 907ie paso owner |
Hello Now the whole bike is dismantled. Waiting for washing and painting preparations. |
Author: | vainika [ Sun Aug 12, 2018 5:35 pm ] |
Post subject: | Re: New 907ie paso owner |
Hello I have problem to solve how to mount ECM on the bike Have anybody so gaintly can take a picture for me under the seat how the ECU have mounted? Thank you very much in advance! |
Author: | englishstiv [ Mon Aug 13, 2018 11:27 am ] |
Post subject: | Re: New 907ie paso owner |
On the 907ie the ECU sits on 3 small rubber bushes beneath the rear part of the seat just in front of the rear seat inner nacelle. If you look at the frame you should see two lugs on the inner frame carrier and one in the middle directly opposite on the other frame carrier. the electric cable connects to the right side of your bike ( sitting on it ) Best thing is download the online manual in the 907ie Tech FAQ. Looking at your Fame photo's I would be interested to confirm your frame number as it may be a 906 frame if you can't locate those lugs? Again check on the Tech FAQ for all the Paso model and 907ie numbers. Does your tank have an internal fuel pump fitted? |
Author: | vainika [ Mon Aug 13, 2018 3:35 pm ] |
Post subject: | Re: New 907ie paso owner |
Page 1 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |