Looking for a complete set of decals for my 907 ie I'm putting together.
Gary 973 723-9052

http://myworld.ebay.co.uk/the-reverend- ... ogposture/

This guy had a few repro sets for sale on ebay last month, I bought a set but havent compared them with the originals but they look good as far as i can tell.

Håvard

Havard,
I also saw those decals and I would be interested too.
Could you check them for the accuracy of the shape and colours?
No matter, I guess the 907 decals would be still available at the dealers, even if much more expensive.
Ciao

Yes i will have a look and tell you what it looks like as soon i can, problem for now i have stored the bike away at a warehouse a bit far from my home.

OK ,
let us know when you'll take a look to the decals (and to the bike, naturally)!
Soon,
Francesco

They are a little expensive and I don't know how true to the originals these are, but Tapeworks makes some Paso decals...

Kit with 750 decals - http://tapeworks.com/DUCATI%20Logo%20Se ... eries.html

page showing the 906 decals - http://tapeworks.com/DUCATI%20Logo%20Sets/DUCp6.gif

I think these decals would be good if you had a custom bike and wanted non-original colors for the decals.

I finally got around to have a look at the decals, as far as i can see this repros is very close to the originals, the only thing i found is that the tank decal in the picture seems to be around 1 cm shorter than the original, but i dont think anybody would notice if it was mounted on the bike.

Håvard

Is the replica the one you have in the hand?

It seems quite perfect!

Ciao

I am not sure are those in foto originals.... Original is 35cm long and 55mm wide, measured just!

Hi,
Yes its the repro im holding, the fonts and colours is very close to originals.
I also did some measurements.
My originals on the bike is 350mm long and 53mm wide.
The repros i measured to 343mm long and 51mm wide.

Håvard