I am after the RIGHT FORK TUBE for 907ie part# 34610061B
I would consider the whole right leg, the condition does not matter provided that the TUBE is intact and in good overall condition.
will considere offers from anywhere in the world
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| RIGHT FORK TUBE for 907ie part# 34610061B http://ducatipaso.org/forum/viewtopic.php?f=4&t=4755 |
Page 1 of 1 |
| Author: | angelix [ Tue Apr 19, 2011 12:12 am ] |
| Post subject: | RIGHT FORK TUBE for 907ie part# 34610061B |
I am after the RIGHT FORK TUBE for 907ie part# 34610061B I would consider the whole right leg, the condition does not matter provided that the TUBE is intact and in good overall condition. will considere offers from anywhere in the world
|
|
| Author: | paso750 [ Wed Apr 20, 2011 7:06 pm ] |
| Post subject: | Re: RIGHT FORK TUBE for 907ie part# 34610061B |
not the one of the 907ie but maybe also of interest http://cgi.ebay.com/Forcella-Marzocchi- ... 231023c115 |
|
| Author: | angelix [ Wed Apr 20, 2011 11:45 pm ] |
| Post subject: | Re: RIGHT FORK TUBE for 907ie part# 34610061B |
yep I already saw that one, buT I have a fork already, I am after a right tube as I already have a Left one (brand new) and I would like to replace mine which are slightly pitted. Once I have the pair I can overhaul my fork and get the old tubes to a specialist for re-croming. |
|
| Author: | paso750 [ Fri Apr 22, 2011 9:21 am ] |
| Post subject: | Re: RIGHT FORK TUBE for 907ie part# 34610061B |
there`s one in Japan http://page4.auctions.yahoo.co.jp/jp/auction/d110253756 G. |
|
| Author: | higgy [ Fri Apr 22, 2011 10:42 am ] |
| Post subject: | Re: RIGHT FORK TUBE for 907ie part# 34610061B |
Hey G Are the 906 right side tubes comparable? |
|
| Author: | paso750 [ Fri Apr 22, 2011 11:11 am ] |
| Post subject: | Re: RIGHT FORK TUBE for 907ie part# 34610061B |
I`d say yes, except to the 40mm vs 108mm brake caliper mounts. G. |
|
| Author: | higgy [ Fri Apr 22, 2011 11:42 am ] |
| Post subject: | Re: RIGHT FORK TUBE for 907ie part# 34610061B |
So as far as you know the tubes are compatible but not the lowers ? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|