Hi paso750,
Is this kit a good price $$?
Have you converted old to new?, is it easy or hard?
Best,
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| 750 valve rocker set (upgrade) http://ducatipaso.org/forum/viewtopic.php?f=4&t=6152 |
Page 1 of 1 |
| Author: | paso750 [ Tue Jun 04, 2013 5:10 pm ] |
| Post subject: | 750 valve rocker set (upgrade) |
the same that the P750s with the golden valve covers (and most later Ducs incl. 750S, 906 etc) have. So only of interest if you have a pre '88 P750. The clips make changing the valve shims a lot easier. http://www.ebay.de/itm/310680792896?ssP ... 1438.l2649 |
|
| Author: | 20YearOwner [ Fri Jun 14, 2013 3:28 pm ] |
| Post subject: | Re: 750 valve rocker set (upgrade) |
Hi paso750, Is this kit a good price $$? Have you converted old to new?, is it easy or hard? Best,
|
|
| Author: | paso750 [ Fri Jun 14, 2013 3:47 pm ] |
| Post subject: | Re: 750 valve rocker set (upgrade) |
it went for €38 that is really cheap. One single rocker arm on ebay is often €20-25. Here are for exanple the parts for one single cylinder head and they`re asking €90 http://www.ebay.de/itm/DUCATI-SS-Monste ... 3cd1f9919b So whoever bought them (and if the rocker arm surfaces were not worn) got a bargain. I have converted from old to new but I had that done when the engine was rebuilt. It`s not a very difficult thing to do. You find the description in the 906 workshop manual or in any from a SS/Monster. G. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|