IMG_23092018_190200_(1024_x_768_pixel).jpg [ 248.67 KiB | Viewed 4139 times ]
| ducatipaso.org http://ducatipaso.org/forum/ |
|
| Mikuni best 38 http://ducatipaso.org/forum/viewtopic.php?f=4&t=7983 |
Page 1 of 1 |
| Author: | HIGHWAY89 [ Sun Sep 23, 2018 4:27 am ] |
| Post subject: | Mikuni best 38 |
Searching for new or good s/hand jet locks for the mikuni bdst 38 carbies |
|
| Author: | paso750 [ Sun Sep 23, 2018 7:35 am ] |
| Post subject: | Re: Mikuni best 38 |
what is a jet lock? |
|
| Author: | HIGHWAY89 [ Sun Sep 23, 2018 11:05 am ] |
| Post subject: | Re: Mikuni best 38 |
IMG_23092018_190200_(1024_x_768_pixel).jpg [ 248.67 KiB | Viewed 4139 times ] |
|
| Author: | HIGHWAY89 [ Sun Sep 23, 2018 11:09 am ] |
| Post subject: | Re: Mikuni best 38 |
Seems like I think the starter jet won't come out as the tops stripped and screwdriver cant work? |
|
| Author: | HIGHWAY89 [ Sun Sep 23, 2018 11:53 am ] |
| Post subject: | Re: Mikuni best 38 |
Sorry mate jetblock |
|
| Author: | paso750 [ Sun Sep 23, 2018 12:36 pm ] | ||
| Post subject: | Re: Mikuni best 38 | ||
That on the right (in your pic) is the starter jet with its bracket that holds down the main jet which lays next to it. Missing in the picture is the long idle jet. Inside the block and below the threads there are copper tubes, these are not removable.
|
|||
| Author: | HIGHWAY89 [ Fri Sep 28, 2018 5:58 am ] |
| Post subject: | Re: Mikuni best 38 |
Yeah thanks Paso750 it may be the idle jet but I have Rudy sending me 2 jetblocks and some other stuff so it should be ok |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|