| ducatipaso.org http://ducatipaso.org/forum/ |
|
| 907 ie chain adjuster wanted http://ducatipaso.org/forum/viewtopic.php?f=4&t=8272 |
Page 1 of 1 |
| Author: | Thebenelliman [ Sun May 17, 2020 5:35 pm ] |
| Post subject: | 907 ie chain adjuster wanted |
Does anybody have a chain adjuster I can buy? I went out on my bike today and it has sheared the bolt and lost the gold plate of the adjuster! |
|
| Author: | paso750 [ Tue May 19, 2020 7:38 am ] |
| Post subject: | Re: 907 ie chain adjuster wanted |
I don't have one but are you looking for left or right side? The end plates are the same for the SS/851/888/ and Monster. The bolt is used in the same models plus Multistrada and ST2/3/4. |
|
| Author: | Derek [ Tue May 19, 2020 10:34 am ] |
| Post subject: | Re: 907 ie chain adjuster wanted |
Still available from Stein Dinse |
|
| Author: | paso750 [ Wed May 20, 2020 10:26 am ] | ||
| Post subject: | Re: 907 ie chain adjuster wanted | ||
I wonder why the bolt broke in the first place. I'm guessing it was tightened a bit more after the axle nuts were or the axle came loose (or the conical spacer is installed the wrong way around?!). The bolts are M8x90mm btw. Since I had read about this also in other forums I lockwired mine. Lockwiring the bolt may have been overdoing it considering the chain has to be checked and readjusted once in a while.
|
|||
| Author: | Thebenelliman [ Wed May 20, 2020 8:21 pm ] |
| Post subject: | Re: 907 ie chain adjuster wanted |
I think the bolt had Metal fatigue and snapped when I accelerated. Thanks Derek I have ordered the part from Stein Diense! It was my first ride in 6 months bike is running well glad I spotted the missing adjuster before the wheel could move! |
|
| Author: | paso750 [ Sun May 24, 2020 6:22 pm ] | ||
| Post subject: | Re: 907 ie chain adjuster wanted | ||
also a solution.  Found on the ducati.ms forum.
|
|||
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|