ducatipaso.org http://ducatipaso.org/forum/ |
|
Wanted: new bodywork panel bolts for Paso 750 http://ducatipaso.org/forum/viewtopic.php?f=4&t=988 |
Page 1 of 1 |
Author: | Jules [ Sun Apr 02, 2006 9:00 am ] |
Post subject: | Wanted: new bodywork panel bolts for Paso 750 |
Author: | Finnpaso [ Sun Apr 02, 2006 12:44 pm ] |
Post subject: | |
Author: | Jules [ Mon Apr 03, 2006 12:55 am ] |
Post subject: | |
Author: | jcslocum [ Mon Apr 03, 2006 1:10 am ] |
Post subject: | |
Jules, It's Jon from the Yahoo list! Good to see you in the forum here. If you find the screws here in the USA you can have them shipped to me and then I will mail them to Japan. We should also move this thread to the 750 Paso part of the forum. |
Author: | Duc750 [ Tue Apr 04, 2006 3:40 pm ] |
Post subject: | |
Jules, Likewise for the UK, I would say go for Dzus quick release alen key type fastners though. If you use a mixture of the clip on back plates and the rivet on type it should work very well and make fairing removal alot easier. I already use the D ring type on my side panels as the come off so often to top up oil and adjust preload etc. the only ones you may still need are the ones attaching the top fairing to the tank. Also try " Pro bolt" in the uk and a company called "Mr Fastener" |
Author: | Finnpaso [ Wed Apr 05, 2006 6:20 am ] |
Post subject: | |
Btw, from what company You guys have bought those Dzus fasteners? I am thinking to put them to ST4S, cause those fairings are much more difficult to open, than Pasos fairings are :confused: |
Author: | Duc750 [ Wed Apr 05, 2006 12:09 pm ] |
Post subject: | |
You can buy direct from DZUS and it is much cheaper but you have to buy in bulk - perhaps a group buy ? |
Author: | Finnpaso [ Wed Apr 05, 2006 7:05 pm ] |
Post subject: | |
From WHAT country those DZUS fasteners come from ??? If from USA, then better, that USA guy makes all needeed things and send to other countries, and if made in EU, then some here in EU area make deal with factory... Do they sell from factory direct??? Seems, that U know something about this thing ![]() I am in deal, if find vise solution, but surely also shipping coast, but maybe not so mch, cause can be send by letter, not need package, what is much higher priced..... Should we open new topic about DZUS fasteners and everybody, who needs then check prices from own country and we discuss them more ??? :confused: |
Author: | Duc750 [ Fri Apr 07, 2006 1:24 pm ] |
Post subject: | |
Author: | fasterdammit [ Fri Apr 07, 2006 1:28 pm ] |
Post subject: | |
Author: | Jules [ Fri Apr 07, 2006 1:46 pm ] |
Post subject: | |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |