I can't help you.
I'm only regretting the smile who licks its lips is gone ....
Ciao

hi!

Just had a very bad day at work but, at the same time, earned a lot of money so i can revise my engine within a month or six weeks!!

About the forks, i've got the same forks too.
I bought two pairs of paiolis
That was because i couldn't get a triple tree without it and i got the carbon fender with it.
but your marvic wheel , says enough!

http://www.mijnalbum.nl/Album=74DRR8H4

as you can see on my new added pics, the risers are mounted under the upper triple.
I still don't think that it comes high enough, but otherwise i will put the old ones on ebay and buy higher risers from ebay.

But i am sure it will fit some day to have a bike with good (hope better) behaviour.

I even thought,and i'm proud on those details, about the laverda decal on the forks.

I've bought a "made in italy" decal on ebay.
They make them in every size.

Of course i will first try to cut and weld the tank to make a good fitment, but i bought already 5 square meters of carbon fibre to make a tank or something else.

ok, thats it for now.

bye , ab.

ps. hey antti, could you use the information?

Hi Zap !

Thank You very much from information ! I am very hurry just now with my ST2, so ill make accurate measurements and adopters later. Thank You for PM me ! Your measuremets are very usefull and i make adopters from 15mm aluminium(propably!), like You wrote, that its better, than 13mm.

Hello Gerhard,

First my steering bearrings are normal paso.

About the cutting: I will try to only cut the front end fairring, but think i have to cut a little piece of the tank.
That's also because i do not want to have a strange "gap" in the fairing, that gives the bikel line (looks) of the fairing a negative influence.
Before i try something i have to draw something first on the fairing itself, so it will take some time before i will actually cut in it.

But i've got everything double for the paso so i use my baddest fairingparts to try it out.


About the engine, it is a '94 900ss.
I drove about 25.000 km with it and it was great but it is time to revise it and give it a little more .
So i already bought the st2 cams, a dynokit, light flywheel and open exhaust system.
The reason why i had to have more money to do it is because i want to make it a 944 (or more) with high compression pistons.
But this is a worry for later.

Then the wheels, they are from a 750ss (17x4,5) rear and you have to cut out the hole for the bearring with 1 mm. around.
So the diameter is 2 mm. bigger to let the bearring fit.
This is because the 750ss rear axle is 17mm and is related to this bearring with 40mm. outside diameter.

They told me that a bearring with outside diameter 40mm. and inside dia. 20mm. does not exist (at the skf dealer), so i have to cut out.
That is a secure job but not mission impossible.

Ok thats it for now, hope someone can do something with the information.

ab.

if I can manage to change the bearings on my edge grinder in time I can try to modify the tank to see if there`s clearance for the fork. I`ll let you know. When that is done it would be time to put on the front fairing and instrument panel to see if the fork touches anywhere. I hope nothing else from the fairing needs any modification.

The step with the engine I`ve already done beginning of last year incl. 780cc kit etc. so luckily I`m rather slowely putting the bike back together than taking it apart

G.

Beautiful texture & finish on your carbon, G.
You take orders?

hey thanks for the info

I will order the 42 mm. bearrings (20mm. inside)

There are a few honing tools available to do the job myself, but i think this can be done more accurate by a pro.
There are several machinists in my area that can do it, and i'm doing some research at the moment for prices.

cheers, ab.

there`re 2 Laverda forks on ebay if anyone is interested





G.

Hey guys!

I think, this was meant to be topic about adopters, but seems, that talking is now something totally another...

Can you make new topic for Faverda things????

Antti,
I can't believe it .
How many times did we start talking about a thing...
But later we finished talking about girls , Koskenkorva , and so on .....

Ciao

Ok, it fits to me... I was saturday in biggest of nordic countries mc fairs/trades in Helsinki,,, fotos from Desmosedici, all new Ducati modells and plenty of cute girls... also i talked with Mika Kallio.... and after fairs surely little Koskenkorva and hot Sauna..... but, all info about adopters is welcome surely....

Antti,

either get the parts I showed you on ebay or go here:


(or get a Paioli fork and you don`t need an adapter )

G.