Need some 907 Fairing parts

du907 · **Posted:** Tue May 31, 2011 2:19 am

Does anyone have a line on 907IE lower fairing for bot sides and the front fairing (piece around headlight)?
Thanks

I could also use the front sub frame that the headlight bolts to (for 907) and Headlight.

Thanks again
Bryon

Bock900r · **Posted:** Tue May 31, 2011 2:35 am

I think the best thing is this http://www.airtech-streamlining.com/duc ... 991-92.htm
its in your Country and the quality looks good.

paso750 · **Posted:** Tue May 31, 2011 7:45 am

headlights
http://shop.ebay.com/i.html?LH_LocatedI ... p=15&_sc=1

higgy · **Posted:** Tue May 31, 2011 11:20 am

that is the stay. Ed at Guzzitech can provide the correct one for you as well as a headlight or anything else you may require :beer:

paso750 · **Posted:** Tue May 31, 2011 11:38 am

that`s not a 907ie front frame.
I can`t help it but not only are some parts from guzzitech expensive but also what he describes as "good shape" is something different in my definition.
Just one example (and looking at the condition it`s probably from the same Paso that front frame came from)
http://cgi.ebay.com/ebaymotors/Ducati-P ... 3f0a67d50a

higgy · **Posted:** Tue May 31, 2011 3:23 pm

Yes G you are correct and yes till Ed gets to know you he gets a good price especially during the racing season.
The 907 is slightly different,not a big deal. Least not to me :thumbup:

I have received many parts from Ed for reasonable prices in good shape,not brand new perfect shape but usable with out a lot of work. :beer:

paso750 · **Posted:** Tue May 31, 2011 3:34 pm

I did get parts from him too and was happy with them. Just saying some things he has on ebay can be found cheaper. Ie good BUBs can be found sometimes for $150.
Can`t remember the exact differences in the front frames although I had one from a 907ie once. It should at least have a mount for the coolant reservoir on the right. Don`t know if the 907ie has some electronics on the left side the other models don´t have. If so there will be another mount missing.

G.

higgy · **Posted:** Tue May 31, 2011 6:03 pm

The big difference is the mounting ears for the relay panel which the 750 and the 906 do not have
Unless of course you rewire the bike like I did and welded on the tabs for the relays and such :smoke:

I did want to buy the ST2 cams from Ed at one point. Initially The price was difficult to swallow and I asked him if he was late on a boat payment,it was worse than that,he was starting his racing season. But to be fair he didn't want to part with them anyway as he could use them himself. In the end he asked me to make an offer,I decided to wait for another set and as you know ST2 cams are on intergalactic backorder :banghead:

duc907 · **Posted:** Wed Jun 01, 2011 1:42 am

your a week late, there was a complete engine with broken mounts on US Desmo for $400.

Tondonic · **Posted:** Mon Jun 06, 2011 9:45 pm

du907,
I have all three of those parts, but they will need a little work. I'll send pictures if you're interested.
Bob

du907 · **Posted:** Tue Jun 07, 2011 1:55 am

Bob, my hero. Yes I'm interested. The pieces I have after my wreck "need a little work" too. Please send and pictures you might have.
du907@earthlink.net

Thanks again
Bryon

JoKing · **Posted:** Tue Jun 07, 2011 8:14 am

Uh... if i`d read that before...

There was a front frame listed on ebay, ended yesterday, sold for 1€.....

Tondonic · **Posted:** Tue Jun 07, 2011 8:28 pm

I'll get some pictures taken and sent in the next few days, Bryon.

Need some 907 Fairing parts

Who is online